Main features:

• temperature range from -40°C to +60°C (-40°F to 140°F)
• resolution 0.1°C and +/- 1.5°C accuracy
• 2 x AA battery or USB power supply
• compatible with 802.11b/g standard and WEP,WPA/WPA2 encryptions
• NO additional hardware needed

WiSpherT° is a real WiFi thermometer which measures environment temperature and broadcasts results into your WLAN. This easy to use smart temperature sensor is fully compatible with 802.11 b/g standard and can be connected directly to your Wi-Fi router without any additional gateways.
Now you can measure temperature in any place you want and see it directly on your smart phone or tablet using our WiSpherT° mobile application.
For more details please refer to WiSpherT° Technical Specification
Here you can see LIVE DATA from test sensors.

Cloud connection

Do you want to check the temperature when you are not at home or in the office or simply not in range of your WiFi network?
That's also possible with WiSpherT°!!!.

Our sensors don't only send temperature within your WLAN but can also upload it to the Internet cloud (server). You can easy access last measurements with your mobile application at any time when you are connected to Internet.

Power supply

Since WiFi communication is quite power consuming, the WiSpherT° doesn't work permanently (to save battery) but makes temperature measurements only in selected time periods, broadcasts results and then goes sleep until next period. The update / broadcast period can be selected in range from 2min. up to 60min. With the two normal AA batteries and update period set to 15min. the sensor can run over 6 months without a need to replace batteries. In case you need temperatures updated often than every 10min. you can connect your sensor to any USB host or power supply and remove batteries. For more details please visit WiSpherT° Technical Specification.

Mobile application

With the WiSpherT° mobile application for Android™ you can easily control all your sensors.
Temperatures can be presented on different widgets together with the measurement time and battery status of the sensor.
The app allows changing following properties of the sensor:

• temperature units C°/F°
• sensor name
• update/measurement period
• select network connection type to be active for update temperature

The app has access to temperature data from one of our test sensors, so you can fully test it before you decide to buy the sensor.
WiSpherT° app is available at

Configuration

The configuration of the sensor is fast and straightforward. Connect your sensor to your PC using USB cable and run our small configuration software tool. Enter your wireless network name (SSID) and password or key in case the network is secured. That's all!!!.
The sensor will automatically connect to your WiFi network and the mobile app will automatically detect it.
Here you can download the WiSpherT° Configuration Tool
To learn more please read our Sensor Configuration Guide or watch the movie below.

How to buy

You can order your WiSpherT° WiFi thermometer in our shop or you can first install the WiSpherT° mobile application and make an order there.
All our products are covered by our 30-days money-back guarantee. You can simply send back the WiSpherT° within one month from the date you have received it and we will give you your money back.